Antonio
Viedma Robles
Catedrático de Universidad
Argitalpenak (87) Antonio Viedma Robles argitalpenak
2023
-
Enhanced thermal-hydraulic performance in tubes of reciprocating scraped surface heat exchangers
Applied Thermal Engineering, Vol. 220
2021
-
In-pipe axial pico-hydraulic tailored turbine design: A novel approach using a dimensionless design chart
Energy Conversion and Management, Vol. 250
2019
-
Flow pattern analysis in a rotating scraped surface plate heat exchanger
Applied Thermal Engineering, Vol. 160
2018
-
CFD simulation of fluid dynamic and biokinetic processes within activated sludge reactors under intermittent aeration regime
Water Research, Vol. 139, pp. 47-57
-
Experimental study of heat transfer to non-Newtonian fluids inside a scraped surface heat exchanger using a generalization method
International Journal of Heat and Mass Transfer, Vol. 118, pp. 75-87
2017
-
CFD Modeling of Legionella's Atmospheric Dispersion in the Explosive Outbreak in Murcia, Spain
Heat Transfer Engineering, Vol. 38, Núm. 11-12, pp. 1063-1072
-
Embedded thermocouple wall temperature measurement technique for scraped surface heat exchangers
Applied Thermal Engineering, Vol. 114, pp. 793-801
-
Numerical study of the behavior of an air pre-cooler
18th IAHJR International Conference on Cooling and Air Cooled Heat Exchangers: Lyon (Francia), del 16 al 20 de octubre de 2017
2016
-
Analysis of the impact of droplets onto water films in drift eliminators
International Journal of Computational Methods and Experimental Measurements, Vol. 4, Núm. 1, pp. 24-32
-
Effects of the aeration on the fluid dynamic behaviour of a multi-zone activated sludge system
WASTE MANAGEMENT AND THE ENVIRONMENT VIII
-
Estudio mediante CFD de la influencia de parámetros característicos en la eficiencia de la etapa de preenfriamiento en aerorefrigeradores
XXI Congreso Nacional de Ingeniería Mecánica: Elche, 9 de noviembre de 2016
-
Flow pattern of non-Newtonian fluids in reciprocating scraped surface heat exchangers
Experimental Thermal and Fluid Science, Vol. 76, pp. 306-323
-
Hydraulic characterization of an activated sludge reactor with recycling system by tracer experiment and analytical models
Water Research, Vol. 101, pp. 382-392
-
Máquinas hidráulicas: teoría y problemas
Universidad Politécnica de Cartagena
-
Numerical analysis of the vacuum infusion process for sandwich composites with perforated core and different fiber orientations
Journal of Sandwich Structures and Materials, Vol. 18, Núm. 4, pp. 415-444
-
Study of the performance of an adiabatic cooling pad in an air cooler system
Renewable Energy and Power Quality Journal, Vol. 1, Núm. 14, pp. 748-753
2015
-
Analysis of the impact of droplets onto water films in drift eliminators
8th lnternational Conference on Multiphase Flow 2015
-
CFD modelization of Legionella’s atmospheric dispersion in the explosive outbreak in Murcia.
17th IAHR International Conference on Cooling Tower and Heat Exchanger
-
Coefficient estimation in the dynamic equations of motion of an AUV
Sixth International Workshop on Marine Technology, Martech 2015
-
Experimental study of BIPV(Building integrated photovoltaics) modules running as solar passive air heaters for the regeneration of a desiccant wheel
2015 AEIT International Annual Conference, AEIT 2015