Development and validation of a virtual engine model for simulating standard testing cycles

Resumo

The new regulations regarding greenhouse emissions and air quality have led the technological progress of the internal combustion engines during the recent years. Improvements in the combustion process, turbocharging, thermal management, after-treatment systems and techniques such as the exhaust gases recirculation, have resulted in cleaner internal combustion engines. The adoption of the new type approval test in Europe, so-called WLTP, which represents a more realistic driving cycle than its forerunner the NEDC, as well as the need to evaluate pollutant emissions at different conditions of ambient temperature and altitude, represent a challenge for manufacturers when it comes to design and optimise their engines. In this context, one-dimensional engine models offer the possibility to develop and test different solutions with enough accuracy, while hastening the engine design process and reducing its costs. The main objective of this thesis is to develop a complete virtual engine model able to simulate transient conditions of engine speed and load, as well as different ambient conditions of pressure and temperature. The engine model is used to predict the main thermo-and fluid dynamic variables at different engine locations and the tailpipe pollutant emissions. Furthermore, engine cold start and its operation at low temperature is associated to a greater fuel consumption, hydrocarbon (HC) and carbon monoxide (CO) emissions; as well as more nitrogen oxide (NOx) emissions due to the deactivation of the exhaust gases recirculation systems. A solution to mitigate these negative effects is to heat up the after-treatment system so as to achieve its activation temperature as soon as possible. In the work presented, this goal is addressed through two different standpoints. On the one hand, variable valve timing systems have been studied as a way to increase the exhaust gases temperature. With this option it is possible to reduce CO and HC emissions by 40-50 % and NOx emissions by 15 % during the first stage of the WLTC cycle, at the expense of a penalty in the fuel consumption. On the other hand, the thermal insulation of the exhaust system has also been studied with the same objective. In this case, it is possible to reduce CO and HC emissions by 30 %, while not improving NOx ones.