Publicaciones en las que colabora con Blas Zamora Parra (55)

2019

  1. Experimental study on pressure loss and collection efficiency of drift eliminators

    Applied Thermal Engineering, Vol. 149, pp. 94-104

2018

  1. Influence of the shape, thermal radiation, and variable properties on the turbulent buoyancy-driven airflow inside cavities with Trombe wall geometry

    Numerical Heat Transfer; Part A: Applications, Vol. 73, Núm. 5, pp. 307-331

2017

  1. CFD Modeling of Legionella's Atmospheric Dispersion in the Explosive Outbreak in Murcia, Spain

    Heat Transfer Engineering, Vol. 38, Núm. 11-12, pp. 1063-1072

  2. Numerical study of the behavior of an air pre-cooler

    18th IAHJR International Conference on Cooling and Air Cooled Heat Exchangers: Lyon (Francia), del 16 al 20 de octubre de 2017

  3. Radiative and variable thermophysical properties effects on turbulent convective flows in cavities with thermal passive configuration

    International Journal of Heat and Mass Transfer, Vol. 109, pp. 981-996

2016

  1. Analysis of the impact of droplets onto water films in drift eliminators

    International Journal of Computational Methods and Experimental Measurements, Vol. 4, Núm. 1, pp. 24-32

  2. CFD analysis of drift eliminators using RANS and LES turbulent models

    Applied Thermal Engineering, Vol. 105, pp. 979-987

  3. Estudio mediante CFD de la influencia de parámetros característicos en la eficiencia de la etapa de preenfriamiento en aerorefrigeradores

    XXI Congreso Nacional de Ingeniería Mecánica: Elche, 9 de noviembre de 2016

  4. Experimental study of drift deposition from mechanical draft cooling towers in urban environments

    Energy and Buildings, Vol. 125, pp. 181-195

  5. Radiative effects on turbulent buoyancy-driven airflow in open square cavities

    International Journal of Thermal Sciences, Vol. 100, pp. 267-283

  6. Study of the performance of an adiabatic cooling pad in an air cooler system

    Renewable Energy and Power Quality Journal, Vol. 1, Núm. 14, pp. 748-753

2015

  1. Analysis of the impact of droplets onto water films in drift eliminators

    8th lnternational Conference on Multiphase Flow 2015

  2. CFD modelization of Legionella’s atmospheric dispersion in the explosive outbreak in Murcia.

    17th IAHR International Conference on Cooling Tower and Heat Exchanger

  3. Cálculos de las emisiones producidas por una torre de refrigeración (arrastre y PM10). Protocolo de ensayo y discusión normativa

    3rd Iberian Meeting on Aerosol Science and Technology, RICTA 2015

  4. Experimental study of BIPV(Building integrated photovoltaics) modules running as solar passive air heaters for the regeneration of a desiccant wheel

    2015 AEIT International Annual Conference, AEIT 2015

  5. Fluid dynamic analysis of a continuous stirred tank reactor for technical optimization of wastewater digestion

    Water Research, Vol. 71, pp. 282-293

  6. Numerical study and experimental validation of thewater films and the detachment of drops on drift eliminators

    Computational Thermal Sciences, Vol. 7, Núm. 2, pp. 167-180

  7. Predicción de la deposición de gotas de agua procedentes de una torre de refrigeración en un entorno urbano mediante el análisis de la evaporación de dichas gotas

    IX Congreso Nacional de Ingeniería Termodinámica: libro de actas (Universidad Politécnica de Cartagena)

  8. Prediction of the lifetime of droplets emitted from mechanical cooling towers by numerical investigation

    International Journal of Heat and Mass Transfer, Vol. 89, pp. 1190-1206

  9. Study of the performance of an adiabatic cooling pad in a cooling tower setup. Póster

    ANSYS Convergence, 2015 Regional Conferences