Argitalpenak (81) Ignacio González Pérez argitalpenak

2024

  1. An exact system of generation for face-milled hypoid gears with uniform depth taper: Application to hypoid gear drives with high gear ratio

    Mechanism and Machine Theory, Vol. 196

  2. Assessing the effects of interference fit assembly on gear tooth surface deviations

    Mechanics Based Design of Structures and Machines

2023

  1. An exact system of generation for face-hobbed hypoid gears: Application to high reduction hypoid gear drives

    Mechanism and Machine Theory, Vol. 179

  2. Evaluation of the effect of the rim thickness on the root stress cycle of helical planet gears with integrated rollers

    VDI Berichte, Vol. 2023, Núm. 2422, pp. 553-568

  3. Improvement of the transmission efficiency in electric vehicles by using double staggered helical gears with shortened teeth

    Forschung im Ingenieurwesen/Engineering Research, Vol. 87, Núm. 3, pp. 1081-1094

  4. Improvement of the transmission efficiency in electric vehicles by using double staggered helical gears with shortened teeth

    VDI Berichte, Vol. 2023, Núm. 2422, pp. 1083-1090

2022

  1. Reverse engineering of spiral bevel gear drives reconstructed from point clouds

    Mechanism and Machine Theory, Vol. 170

2021

  1. Application of the Bilateral Filter for the Reconstruction of Spiral Bevel Gear Tooth Surfaces from Point Clouds

    Journal of Mechanical Design, Transactions of the ASME, Vol. 143, Núm. 5

  2. Computerized generation and tooth contact analysis of spherical gear couplings for high misalignment applications

    Mechanism and Machine Theory, Vol. 164

  3. Investigation of the Effect of Application of Non-Conventional Root Profiles for Reduction of Bending Stresses in Helical Gear Drives

    American Gear Manufacturers Association Fall Technical Meeting 2021

  4. Investigation of the effect of contact pattern design on the mechanical and thermal behaviors of plastic-steel helical gear drives

    Mechanism and Machine Theory, Vol. 164

  5. Virtual Metrology of Helical Gears Reconstructed from Point Clouds

    Mechanisms and Machine Science (Springer Science and Business Media B.V.), pp. 107-129

2020

  1. Stress analysis of strain wave gear drives with four different geometries of wave generator

    Meccanica, Vol. 55, Núm. 11, pp. 2285-2304

  2. Tooth contact analysis of cylindrical gears reconstructed from point clouds

    Mechanisms and Machine Science (Springer), pp. 219-237

2019

  1. Computerized generation and meshing simulation of face gear drives manufactured by circular cutters

    Mechanism and Machine Theory, Vol. 133, pp. 44-63

  2. Conjugated action and methods for crowning in face-hobbed spiral bevel and hypoid gear drives through the spirac system

    Mechanism and Machine Theory, Vol. 139, pp. 109-130

2018

  1. Compensación de los errores de alineación provocados por las deflexiones de los ejes en transmisiones de engranajes cónicos espirales diseñadas con distintos tipos de huella de contacto

    Revista iberoamericana de ingeniería mecánica, Vol. 22, Núm. 2, pp. 103-119

  2. Compensación de los errores de alineación provocados por las deflexiones de los ejes en transmisiones de engranajes cónicos espirales diseñadas con distintos tipos de huella de contacto

    XXII Congreso nacional de ingeniería mecánica: Madrid, del 19 al 21 de septiembre de 2018

  3. Computational approach to design face-milled spiral bevel gear drives with favorable conditions of meshing and contact

    Meccanica, Vol. 53, Núm. 10, pp. 2669-2686

  4. Computerized generation and gear mesh simulation of straight bevel gears manufactured by dual interlocking circular cutters

    Mechanism and Machine Theory, Vol. 122, pp. 160-176