Departamento
Ingeniería Térmica y Fluidos
Publicaciones (47) Publicaciones en las que ha participado algún/a investigador/a
2018
-
0 Waste & 0 Energy 4 Cleaning Water
II INTERNATIONAL SYMPOSIUM ENVIROMENTAL PROCESS ENGINEERING AND TECHNOLOGIES: : Stuttgart, 22 de noviembre de 2018
-
50. Actitud hacia el aprendizaje colaborativo de los alumnos noveles de la Universidad Politécnica de Cartagena
El compromiso académico y social a través de la investigación e innovación educativas en la Enseñanza Superior (Octaedro), pp. 495-505
-
A CFD approach to understand nasoseptal perforations
European Archives of Oto-Rhino-Laryngology, Vol. 275, Núm. 9, pp. 2265-2272
-
Actitud ante el aprendizaje colaborativo en el estudiante de Ingeniería de la UPCT
REDES-INNOVAESTIC 2018
-
Analysis of natural convection on enhanced solar latent-thermal energy storage
Proceedings of On-site Session: 1st International Symposium on Mechanics: Aberdeen ( Reino Unido), del 10 al 12 de julio de 2018
-
Análisis de las actitudes visuales y verbales de alumnos noveles de grado de Ingeniería en la Universidad Politécnica de Cartagena
XXVI Congreso Universitario de Innovación Educativa en las Enseñanzas Técnicas: libro de actas
-
Análisis de las competencias del Grado en Ingeniería de Organización Industrial del CUD de San Javier a través de las prácticas externas
III Congreso Internacional de Innovación Docente (CIID18): Murcia, 20 y 21 de marzo de 2018
-
CFD simulation of fluid dynamic and biokinetic processes within activated sludge reactors under intermittent aeration regime
Water Research, Vol. 139, pp. 47-57
-
Comparison of the performance of two different DOAS configurations involving conventional and renewable energies
Solar Energy, Vol. 169, pp. 284-296
-
Conjugate heat transfer in a solar-driven enhanced thermal energy storage system using PCM
Proceedings of the World Congress on Mechanical, Chemical, and Material Engineering
-
Convective heat transfer measurements in tubes with equally spaced baffles under steady and oscillatory flow
International Heat Transfer Conference
-
Determination of the optimal size of photovoltaic systems by using multi-criteria decision-making methods
Sustainability (Switzerland), Vol. 10, Núm. 12
-
DigBody®: A new 3D modeling tool for nasal virtual surgery
Computers in Biology and Medicine, Vol. 98, pp. 118-125
-
El alumno del Grado en Ingeniería Mecánica de la UPCT. Utilidad de la determinación de los estilos de aprendizaje
XXII Congreso Nacional de Ingeniería Mecánica, CNIM 2018
-
Energetic analysis of a geodesic and self-sufficient housing
1st International Conference on Data for Low Energy Buildings: Murcia, 28 y 29 de junio de 2018
-
Energy recovering using greywater as cold body in a CO2 heat pump water heater
Refrigeration Science and Technology
-
Enhanced heat transfer and power dissipation in oscillatory-flow tubes with circular-orifice baffles: a numerical study
Applied Thermal Engineering, Vol. 141, pp. 494-502
-
Estudio de la carga de trabajo percibida y de la calidad docente en los grados de la Escuela Técnica Superior de Arquitectura y Edificación de la Universidad Politécnica de Cartagena
Advances in Building Education, Vol. 2, Núm. 2, pp. 45-62
-
Experimental correlations on critical Reynolds numbers and friction factor in tubes with wire-coil inserts in laminar, transitional and low turbulent flow regimes
Experimental Thermal and Fluid Science, Vol. 91, pp. 64-79
-
Experimental study of heat transfer to non-Newtonian fluids inside a scraped surface heat exchanger using a generalization method
International Journal of Heat and Mass Transfer, Vol. 118, pp. 75-87